missing

关注
创建者:捡起明天 创建时间:2023-01-19
missing图1

missing的学习资料下载

未命名.JPG

我是新手,在按照自带教程上的例子做,求解时候无法运行了.请问这个是怎么回事?是破解装的不好嘛?具体看了下,应该是求解器 lsdyna.exe和lsdyna_d.exe不能用 那位高手有解决办法啊~~~

73.03KB
查看
missing图2

missing的问答

missing property definitions?
运用abaqus6.14有限元软件,将有限元转换成SPH粒子后,数据检查出现以下错误。关闭“有限元转换成SPH粒子”选项,数据检查没有问题,跪求各位大佬答应,万分感谢
inp中编辑
missing lisece.............
为什么dynaform5.7
missing degree of freedoms.
模型总是出现如下错误:2 nodes are missing degree of freedoms. The MPC/Equation/kinematic coupling constraints can not be formed. The nodes have been identified in node set ErrNodeMissingDofConstrDef. 底部的刚体和中间的物体是
求助, User subroutine umat is missing
在Abaqus中调用材料子程序是出现错误:User subroutine umat is missing,如何解决啊,求高手指点,急急急!
在创建Job的时候,没有选择.for文件,就会出现这种情况
Abaqus USER SUBROUTINE ORIENT IS MISSING
对复合材料飞机盒结构进行abaqus建模分析,每次都会出现如下错误,求高人指点: USER SUBROUTINE ORIENT IS MISSING
丢失坐标系?

missing的案例

hypermesh Solid map,multi solids方法计算错误"missing the permeability. (1)六面体网格划分,计算屈曲,问题描述如下 736 elements are are missing the permeability definition. The elements hidentified in element set
分析的时候出现 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. **************** Too many error messages. Aborting run. Current limit is 10000. Use "MSGLMT" control card to change this
hypermesh Solid map,multi solids方法计算错误"missing the permeability. (1)六面体网格划分,计算屈曲,问题描述如下 736 elements are are missing the permeability definition. The elements hidentified in element set ErrElemMissingPermeability

missing的最新内容

hypermesh Solid map,multi solids方法计算错误"missing the permeability. (1)六面体网格划分,计算屈曲,问题描述如下 736 elements are are missing the permeability definition. The elements hidentified in element set
hypermesh Solid map,multi solids方法计算错误"missing the permeability. (1)六面体网格划分,计算屈曲,问题描述如下 736 elements are are missing the permeability definition. The elements hidentified in element set ErrElemMissingPermeability
Orcad输出网表出现“PCB Footprint missing”的错误,应该怎么处理呢?呢?呢? 答:在使用Orcad软件输出Allegro第一方网表,出现如下错误: #1 ERROR(ORCAP-36002): Property "PCB Footprint" missing
Orcad输出网表出现“Pin number missing”的错误,应该怎么处理呢? 答:在使用Orcad软件输出Allegro第一方网表,出现如下错误: #1 ERROR(ORCAP-36022): Pin number missing from Pin "1" of
分析的时候出现 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. **************** Too many error messages. Aborting run. Current limit is 10000. Use "MSGLMT" control card to change this