SURFACE DEFINITION ASSEMBLY_AIRBIAOMIAN NOT FOUND.的搜索结果
-
621
Error in job Job-1: SURFACE ASSEMBLY__M11 CAN ONLY HAVE COUPLED PORE PRESSURE-DISPLACEMENT UNDERLYING ELEMENTS Error in job Job-1: SURFACE DEFINITION ASSEMBLY__M11 NOT FOUND. -
0
在学习了您的水下爆炸对结构损伤的分析课程后，我对照着您请的内容，做了一遍，在将inp文件放入job中检查时，提示出错，未见设置的两个接触面，如下： Surface definition assembly_surf-waterjiechu not found. Surface definition assembly_surf-boxjiechu not found. -
1年前 abaqus分析时出现错误？3
SURFACE ASSEMBLY_GXB1 CANNOT BE A RIGID SURFACE WHEN USED IN THE *COUPLING DEFINITION IN Abaqus/Standard.
-
3
star ccm和abaqus协同仿真流固耦合， Error:surface definition assembly_FSLSURFnot found note: due to an input error the analysis pre processor has been unable to interpret some data
-
3265
THIS MAY BE DUE TO EARLIER INPUT ERRORS OR SPECIFICATION OF A NONEXISTANT CAVITY OR SURFACE NAME；检查一下你的output設定裡是不是有些set或surface沒有設定到。 24）123 nodes may have incorrect normal definitions.
-
6年前 多步分析？8
Surface definition assembly__pickedsurf17 not found. Surface definition assembly__pickedsurf12 not found. Surface definition assembly__pickedsurf14 not found.
-
3075
Avoid redundant contact definitions, that is, don’t treat contact between the same two parts using more than one contact definition.
-
4年前 abaqus新手求教？？？？1
, rigid bodies, etc.Not all the nodes that do not find intersection with the master surface are printed.
-
5年前 abaqus做仿真提示的错误？12
Surface assembly_part21-1_surf-igbt-base not found Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-cooler but this surface/node-based
-
5年前 ABAQUS问题？4
__S_SURF-1_S3 *surface, type=ELEMENT, name=ASSEMBLY_S_SURF-1 *surface, type=ELEMENT, name=ASSEMBLY_S_SURF-1 *coupling, constraintname=ASSEMBLY_CONSTRAINT-1, refnode=ASSEMBLY_M_SET-1, surface=ASSEMBLY_S_SURF
-
0
Each Contact definition must start with a *CONTACT_... card *** Warning extra card found in *CONTACT read The following card will be ignored.
-
6854
THIS MAY BE DUE TO EARLIER INPUTERRORS OR SPECIFICATION OF ANONEXISTANT CAVITY OR SURFACE NAME 检查一下你的output設定裡是不是有些set或surface沒有設定到 24 123 nodesmay have incorrect normal definitions.
-
2
Maximum overclosure between surface ASSEMBLY_SURF-PIN and surface ASSEMBLY_SURF-DISC is 2.87868E-19.
-
1
*Nset, nset=Part-2-RefPt_, internal 122, *Elset, elset=Part-2, generate 1, 100, 1 *End Part ** ** ** ASSEMBLY ** *Assembly, name=Assembly ** *Instance, name=Part-2-1, part=Part-2
-
8年前 接触收敛问题15359
下面是警告的内容： 408 nodes may have incorrect normal definitions. The nodes have been identified in node set WarnNodeIncorrectNormal. 410 nodes may have incorrect normal definitions.
-
1651
30、去铜箔面：foil removal surface 31、层压板面：unclad laminate surface 32、基膜面：base film surface 33、胶粘剂面：adhesive faec 34、原始光洁面：plate finish 35、粗面：matt finish 36、纵向：length wise direction 37、模向：cross wise direction
-
7年前 妹纸真心提问，望大神看到回答5
Slave surface assembly__pickedset23_cns_ is a node-based surface used with surface to surface approach.
-
5年前 abaqus警告信息2
但是在提交计算的时候总是出现以下三个问题，希望大牛们能够给解答一下 深表谢意： 1：The node 1612 instance part-lizhu-c-c-2 of surface assembly_lizhuface-qianmian has underlying shell elements with spos and sneg face identifiers（这种话出现上百次）； 2
-
2年前 meesag文件？0
273 has zero area *** Error beam 274 has zero area *** Error beam 275 has zero area *** Warning Massless nodes The following massless nodes were found
-
4379
If nothing is found, findAt uses the tolerance for imprecise geometry (applicable only for imprecise geometric entities).
