*** ERROR ***                           CP =     109.653   TIME= 18:43:42

 There is not enough memory for the Sparse Matrix solver to proceed.     

 Please increase the virtual memory on your system and/or increase the   

 work space memory and rerun ANSYS.  Alternatively, forcing the use of   

 the minimum out-of-core memory mode (BCSOPTION,,MINIMUM) may allow a    

 solution to be achieved without increasing the system memory or         

 decreasing the problem size.  The memory currently allocated by ANSYS   

 = 320 MB.  The memory allocation attempted = 473 MB.  The largest       

 block of ANSYS memory available for the Sparse Matrix solver = 12 MB.   


 *** WARNING ***                         CP =     111.073   TIME= 18:47:32

 An increment of 15 is not allowed for the range of 2 TO 1.  The VSEL    

 command is ignored.                                                     


 *** WARNING ***                         CP =     111.151   TIME= 18:47:32

 EMODIF is not a recognized SOLUTION command, abbreviation, or macro.    

  This command will be ignored.                                          


 *** WARNING ***                         CP =     111.229   TIME= 18:47:32

 An increment of 9 is not allowed for the range of 6 TO 3.  The VSEL     

 command is ignored.                                                     


 *** WARNING ***                         CP =     111.354   TIME= 18:47:32

 EMODIF is not a recognized SOLUTION command, abbreviation, or macro.    

  This command will be ignored.                                          


 *** WARNING ***                         CP =     111.463   TIME= 18:47:32

 An increment of 13 is not allowed for the range of 8 TO 4.  The VSEL    

 command is ignored.                                                     


 *** WARNING ***                         CP =     111.556   TIME= 18:47:32

 EMODIF is not a recognized SOLUTION command, abbreviation, or macro.    

  This command will be ignored.                                          


 *** WARNING ***                         CP =     111.619   TIME= 18:47:32

 An increment of 21 is not allowed for the range of 10 TO 5.  The VSEL   

 command is ignored.                                                     


 *** WARNING ***                         CP =     111.712   TIME= 18:47:32

 EMODIF is not a recognized SOLUTION command, abbreviation, or macro.    

  This command will be ignored.                                          


 *** WARNING ***                         CP =     111.822   TIME= 18:47:32

 EMODIF is not a recognized SOLUTION command, abbreviation, or macro.    

  This command will be ignored.                                          


 *** WARNING ***                         CP =     111.946   TIME= 18:47:32

 SOLU is not a recognized BEGIN command, abbreviation, or macro.  This   

 command will be ignored.                                                


 *** WARNING ***                         CP =     112.024   TIME= 18:47:32

 ANTYPE is not a recognized BEGIN command, abbreviation, or macro.       

 This command will be ignored.                                           


 *** WARNING ***                         CP =     112.040   TIME= 18:47:33

 NROPT is not a recognized BEGIN command, abbreviation, or macro.  This  

 command will be ignored.                                                


 *** WARNING ***                         CP =     112.071   TIME= 18:47:33

 RESCONTR is not a recognized BEGIN command, abbreviation, or macro.     

 This command will be ignored.                                           


 *** WARNING ***                         CP =     112.102   TIME= 18:47:33

 OUTRES is not a recognized BEGIN command, abbreviation, or macro.       

 This command will be ignored.                                           


ANSYS CAE 结构CAE
默认 最新
我是圆周率 2016年11月7日
明显的是内存不足!
2016年11月7日
智创仿真 2016年11月7日
第一句就直接告诉你了,内存不足。要么简化模型,减小单元规模,要么换电脑
2016年11月7日
海阔天空5 2016年10月31日
电脑不行啊 换个牛逼的吧
2016年10月31日