adams接触.ppt
Adams软件CONTACT(接触)设置
节选段落一：
Contact Modeling in ADAMS
Todd McDevitt, Ph.D., P.E.节选段落二：
Workshop: Pawl to Gear Tooth Contact
Objective:
Introduce the mechanics of creating contact constraints in ADAMS/VIEW.
Workshop: Pawl to Gear Tooth Contact
Start ADAMS/VIEW.
At the UNIX prompt:
cd ppm
adams101 -c aview ru-s i e
Read in command file.
Click Import a file; then click OK.节选段落三：
Shortcomings
simplistic friction model, no stiction
limited 3D contact features (addressed in ADAMS 11.0)
no contact sensing (addressed in ADAMS 11.0)
speed (addressed in ADAMS 11.0)
ADAMS Contact Elements
Avenues for Future Development
(As I see it!)
Contact Modeling in ADAMS
Todd McDevitt, Ph.D., P.E.节选段落二：
Workshop: Pawl to Gear Tooth Contact
Objective:
Introduce the mechanics of creating contact constraints in ADAMS/VIEW.
Workshop: Pawl to Gear Tooth Contact
Start ADAMS/VIEW.
At the UNIX prompt:
cd ppm
adams101 -c aview ru-s i e
Read in command file.
Click Import a file; then click OK.节选段落三：
Shortcomings
simplistic friction model, no stiction
limited 3D contact features (addressed in ADAMS 11.0)
no contact sensing (addressed in ADAMS 11.0)
speed (addressed in ADAMS 11.0)
ADAMS Contact Elements
Avenues for Future Development
(As I see it!)
adams接触.ppt的相关案例教程
【经典PPT】有限元实例分析PPT，专业知识加实战，速来看！
免责声明：本文系网络转载，版权归原作者所有。如涉及版权，请联系删除！文中内容仅代表作者个人观点，转载不同于本平台认同或者持有相同观点。
【专业PPT】把这个知识点用好，会让你的设计锦上添花——PPT详解平面铰链四杆机构
免责声明：本文系网络转载，版权归原作者所有。如涉及版权，请联系删除！文中内容仅代表作者个人观点，转载不同于本平台认同或者持有相同观点。
中石油PPT│炼油及化工企业设备的选型和设计计算（下），附全文PPT下载！
编 辑 | 化工活动家 来 源 | 中石油
项目客服
培训客服
