ASTM D95-05 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.pdf

节选段落一：
T55
Standard Test Method for
Water in Petroleum Products and Bituminous Materials by
Distillation1
This standard is issued under the fixed designation D95; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision.


节选段落二：
This standard has been approved for use by agencies of the Department of Defense.
1. Scope
1.1 This test method covers the determination of water in
the range from 0 to 25 % volume in petroleum products, tars,
and other bituminous materials by the distillation method.


节选段落三：
Determination of Water in Crude Oil
by the Distillation Method (ASTM Test Method D4006)
MPMS Chapter 10.6 Test Method for Water and Sediment in
Fuel Oils by the Centrifuge Method (Laboratory Proce-
dure) (ASTM Test Method D1796)
3.