tutorial.pdf

节选段落一：
Done
Your grid should look something like the one in Figure 1.8.
1-12
Tutorial Wrap-up
Figure 1.8 An Unstructured Domain for the Bump
1.10 Tutorial Wrap-up
This completes the Gridgen tutorial. If you want to save this grid:
1. Select I/O from the Quick Keys.
2. Gridgen Export
3. Type In...


节选段落二：
You have com-
pleted this tutorial.
2-9
2D Airfoil: Re-Extrude
2-10
3. Cubes and Spheres: Layer Man-
ager
3.1 Introduction
This section includes a brief tutorial to help you become familiar with the basic operations of Gridgen’s
Layer Manager.


节选段落三：
There will be no actual entity creation in this tutorial.