introductory Examples Manual for LS-DYNA.pdf

节选段落一：
Introductory
Examples Manual for
LS-DYNA® Users
June, 2013
(draft)
James M. Kennedy
LIVERMORE SOFTWARE TECHNOLOGY CORPORATION (LSTC)
Table of Contents
Introduction............................................................................................................................


节选段落二：
Introduction
This document presents some LS-DYNA examples providing a basic guide in different
disciplines like:
• Structural static (stress analysis, buckling analysis and modal analysis)
• Structural dynamic (vibrations and impact)
• Thermal analysis (heat transfer via conduction, convection and radiation


节选段落三：
NAFEMS
NL4 LS-DYNA NAFEMS
NL4 LS-DYNA NAFEMS
NL4 LS-DYNA
P (load) AU (disp) AU (disp) BU (disp) BU (disp) CV (disp) CV (disp)
30.6499 10× 650.0 650.0 0.0904 0.0903 5.241 5.242
31.300 10× 1300.0 1300.0 0.2328 0.2329 13.260 13.266
31.949 10× 1950.0 1949.0 0.5149 0.5150 27.080 27.079
32.599 10× 2600.0