f16.STEP

节选段落一：
ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP203' )
'1' );
FILE_NAME ('f16.STEP'
'2016-01-16T00:31:07'
( '' )
( '' )
'SwSTEP 2.0'
'SolidWorks 2015'
'' );
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
ENDSEC;

DATA;
#1 = CARTESIAN_POINT ( 'NONE' (


节选段落二：
' ( -16.26015058962753900 0.05518948586057836200 -232.0286696635309600 ) ) ;
#14 = CARTESIAN_POINT ( 'NONE' ( 25.79826616601373600 31.64050834737684100 -168.7250334536248300 ) ) ;
#15 = CARTESIAN_POINT ( 'NONE' ( -34.81063380965702000 19.56908596273341800 -215.7297416182558200 ) ) ;
#16


节选段落三：
' * * #26456 .T. ) ;
#251 = CARTESIAN_POINT ( 'NONE' ( -31.63361014999362900 19.29357816872633400 -179.5447708919517400 ) ) ;
#253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE' 3
( #14602 #33462 #11760 #6422 #30958 #25392 #4030 #30726 #33689 #25623 #22898 #28463 )
.UNSPECIFIED. .F.