为何模拟只进行了一步就停止？
浏览：105398 回答：11
我的模型如下图所示，前几天模拟时未设置STOP，只在模拟控制STEP中设置了STEP=29,步长为0.2mm（凸模压下量为5.8mm），模拟计算完了40步，模具行程为6.3mm左右，与实际不符。今天在前面模型的基础上，又增加了STOP控制步，希望凸模运行5.8mm程序停止模拟，可是只模拟了一步便出现如下提示：请问各位是什么问题？
*** INFO: Begin of Simulation for Run# 1
Starting time is:Mon Jan 05 11:19:19
*** INFO: End of Simulation for Run# 1
FEM MESSAGE:
OLD AVE. STRAIN RATE= 0.278379
OLD LIMITING STR. R.= 0.002784
NEW AVE. STRAIN RATE= 0.279848
NEW LIMITING STR. R.= 0.002798
UPDATED TIME/STROKE = 0.040000 0.400000
TIME/STROKE INCREMENT = 0.020000 0.200000
PROGRAM STOPPED!
THE DISTANCE BETWEEN TWO OBJECTS ( 2 3)- 5.3998000 HAS REACHED THE SPECIFIED LIMIT 5.8000000
*** INFO: Begin of Simulation for Run# 1
Starting time is:Mon Jan 05 11:19:19
*** INFO: End of Simulation for Run# 1
FEM MESSAGE:
OLD AVE. STRAIN RATE= 0.278379
OLD LIMITING STR. R.= 0.002784
NEW AVE. STRAIN RATE= 0.279848
NEW LIMITING STR. R.= 0.002798
UPDATED TIME/STROKE = 0.040000 0.400000
TIME/STROKE INCREMENT = 0.020000 0.200000
PROGRAM STOPPED!
THE DISTANCE BETWEEN TWO OBJECTS ( 2 3)- 5.3998000 HAS REACHED THE SPECIFIED LIMIT 5.8000000
ljz612 
