求助：模拟磨损时第一步出现错误
浏览：165160 回答：14
出现如下错误提示：
Step number is -1
Convergence Criteria for Iterative Solver
V-norm = 5.00E-03 F-norm = 5.00E-02
Info: NO switch from CG to SP solver
Contact between deforming objects
Contact between deforming objects
RSE routine will not be activated
STEP NUMBER = 1
Program stopped: An integer is too big after N=, 185651
请问有谁知道出了什么问题？请指出解决措施。
望不吝赐教，感谢！
Step number is -1
Convergence Criteria for Iterative Solver
V-norm = 5.00E-03 F-norm = 5.00E-02
Info: NO switch from CG to SP solver
Contact between deforming objects
Contact between deforming objects
RSE routine will not be activated
STEP NUMBER = 1
Program stopped: An integer is too big after N=, 185651
请问有谁知道出了什么问题？请指出解决措施。
望不吝赐教，感谢！
13631390875 
