2021Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres.pdf

节选段落一：
Composites Part B 211 (2021) 108671
A
1
Contents lists available at ScienceDirect
Composites Part B
journal homepage: www.elsevier.com/locate/composites
Numerical modelling of the elastic properties of 3D-printed specimens of
thermoplastic matrix reinforced with continuous fibres
E.


节选段落二：
fibres
A B S T R A C T
Numerical modelling of 3D-printed Fused Filament Fabrication (FFF) specimens with thermoplastic matrices
reinforced with continuous fibres is still in its infancy.


节选段落三：
modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
Introduction-state-of-the-art
The multi-scale numerical approach
Material properties
Micro-scale
Concept and development of the micro-scale model
Results of the micro-scale model