Fluent_Meshing_16面网格划分教程.pdf
Fluent_Meshing_16面网格划分教程
节选段落一：
November 7, 2016 1
16.0 Release
Workshop 05
Surface Mesh Preparation - ASMO
Introduction to
ANSYS Fluent Meshing
© 2015 ANSYS, Inc. November 7, 2016 2
Workshop Description:
This workshop shows some of the clean up tools in Fluent Meshing for boundary
meshes.节选段落二：
Click OK to start Fluent in meshing mode.节选段落三：
Starting ANSYS Fluent in Meshing Mode
Note: This tutorial uses the newly introduced
Icons for improving the surface mesh. Fluent
Meshing needs to be launched in serial mode to
display these icons.
The workshop geometry is a simple half-car
geometry in a wind tunnel.
November 7, 2016 1
16.0 Release
Workshop 05
Surface Mesh Preparation - ASMO
Introduction to
ANSYS Fluent Meshing
© 2015 ANSYS, Inc. November 7, 2016 2
Workshop Description:
This workshop shows some of the clean up tools in Fluent Meshing for boundary
meshes.节选段落二：
Click OK to start Fluent in meshing mode.节选段落三：
Starting ANSYS Fluent in Meshing Mode
Note: This tutorial uses the newly introduced
Icons for improving the surface mesh. Fluent
Meshing needs to be launched in serial mode to
display these icons.
The workshop geometry is a simple half-car
geometry in a wind tunnel.
