ABAQUS切削仿真遇到的问题
浏览：147412 回答：2
初学abaqus，做二维切削仿真时出现如下错误，希望高手解答
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
There are a total of 4 excessively distorted elements
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
Abaqus/Explicit Analysis 由于出错而退出 如果 状态 文件存在, 请从该文件中获得可能的错误消息.
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
There are a total of 4 excessively distorted elements
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
Abaqus/Explicit Analysis 由于出错而退出 如果 状态 文件存在, 请从该文件中获得可能的错误消息.
乾乾公子 
![[免费案例]Ensight案例教程分享](https://img.jishulink.com/cimage/245b3ca9e2c939e40491a25edae94515.jpeg?image_process=resize,fw_576,fh_320,)
