ansys疲劳分析，输入计算命令后无法计算，急急急，望各位指教

最近在做ansys疲劳分析，下列命令做到最后疲劳分析时，都会出现问题，问题提示为：N values missing, out of order, non-positive. The FTCA command is ignored大家帮忙看看这个命令流问题出在最后的哪里？拜托了命令为：finish/clear/prep7et,1,solid186MP,EX,1,2.1E11MP,PRXY,1,0.3k,,0,0k,,0,25k,,425,25k,,425,12.5k,,162.5,12.5k,,150a,1,2,3,4,5,6k,,437.5,12.5a,4,3,7k,,312.5,12.5k,,325,12.5k,,325a,8,9,10k,,750k,,750,25k,,600,25k,,587.5,12.5a,9,10,11,12,13,14allsel,allvoffst,1,90voffst,2,90voffst,3,90voffst,4,-90vglue,1,3vglue,2,4wpoffs,150wprota,,,90vsbw,allwpoffs,,,12.5vsbw,allwpoffs,,,150vsbw,allwpoffs,,,12.5vsbw,allwpoffs,,,100vsbw,allwpoffs,,,12.5vsbw,allwpoffs,,,150vsbw,allwpoffs,,,12.5vsbw,allwpstyl,defaVATT,1,,1esize,12.5vmesh,allnsel,s,loc,x,0,0d,all,allallsel,allnsel,s,loc,x,750sf,all,pres,-1.11e5/soluallssolve fini /post1 FTSIZE,1,2,2, FP,1,1e2,1e3,1e4,1e5,2e5,3e5 FP,7,5e5,7e5,9e5,1.5e6,2.5e6,3e6FP,13,4e6,6e6,6e6,7e6, ,FP,19, ,FP,21,636,457,328,235,213,200 FP,27,187,178,170,158,147,143 FP,33,138,134,131,130, , FP,39, ,fs,393,1,1,1,0,0,0,0,0,0 set,1,last FSNODE,393,1,2 fe,1,10000,2.5 fs,393,2,1,1,0,0,0,0,0,0 set,1,last FSNODE,393,2,2 FE,2,10000,1, FTCALC,1 fini